≡ Menu

Q & A Interview With Gary Duncan of Powerflex :: Part Three

Again, a big thank you to Gary Duncan for taking the time to answer these questions and to chime in on the comments. Here are the next two questions I asked him along with his wonderful responses.

3.) What makes the PowerFlex post and the hi-tensile fencing system good option for the farm practicing Management Intensive Grazing.

I think that the answer to that is “flexibility”. This system offers a lot of benefits during installation and afterwards. It is an easy system to install and should you want to add a gate later it is very easy to accommodate that as well. As we become better graziers, we often need to modify our system to fit our needs and climatic conditions. With this system it is very easy to add portable fencing components to further subdivide larger paddocks and get better utilization of our resources. Besides that it is more economical to install and will last much longer.

4.) Obviously when you are dealing with electric fence the fence energizer is an important piece of the puzzle. What sort of advice do you generally give to someone when they are picking out an energizer?

First off, don’t necessarily believe everything that you read on the label of the box ! There is really no international standard in the way energizers are rated, so labeling can be very confusing. Some manufacturers state stored joules while others give you output joules. Most will give you mileage and some will give you acres. These claims will vary greatly depending on may factors. Most manufacturers will claim that one output joule will power about 10 miles of fence. They may with a clean fence with no vegetation on it. However, when you consider grass and vegetation load you would be better off using 3 miles per joule. This will give you adequate power under high vegetation periods. If a manufacturer only gives you the stored joule rating, then reduce that by about 30% to know what the output joule rating is. With electric fence energizers, more power is better than not enough power. Another aspect to be aware of is grounding the energizer. None of them will operate to optimum performance without adequate grounding. One suggestion is to install 3 feet of ground rod per output joule.

Related Posts Plugin for WordPress, Blogger...
{ 1 comment… add one }
  • asok July 15, 2009, 5:57 pm

    That is great to know having again Mr Duncan,I m interested to know that how long it will work properly.So that I can use it in my farming with out having fear of damage.

    peter

    out sourcing BPO& call center solution

Leave a Comment